Skip to content

CAHAYA CY0331 projector tripod stand with tilting tray

The tray dimensions are published, which is the one measurement that decides whether a projector will sit on it.

CAHAYA projector tripod stand with tilting tray

CAHAYA CY0331 projector tripod stand with tilting tray

The tray dimensions are published, which is the one measurement that decides whether a projector will sit on it.

Height range
66–131 cm — stated
Tray
40.64 × 27.94 cm — stated
Tilt
Tray tilts up to 180° — stated
Stated load
Up to 10 kg — stated
Locking
Anti-slip collar fixing the chosen height — stated
Construction
Three-legged metal tripod — stated
Mounting interface
A flat tray — no 1/4-inch thread stated
Own weight
Not published in this listing
Amazon reference
B0CBR7B6TG (same reference on 6 Amazon marketplaces)
EAN
5060987641349
  • Publishes the tray dimensions, which is the measurement that decides fit
  • A height range starting at 66 cm, low enough for a coffee-table geometry
  • A flat tray is far less secure than a 1/4-inch thread screwed into the projector

Best for: A projector moved between rooms or taken outside, where a fixed mount is not an option.

≈ £29 / 30 €
Check price on Amazon

Specifications

Height range
66–131 cm — stated
Tray
40.64 × 27.94 cm — stated
Tilt
Tray tilts up to 180° — stated
Stated load
Up to 10 kg — stated
Locking
Anti-slip collar fixing the chosen height — stated
Construction
Three-legged metal tripod — stated
Mounting interface
A flat tray — no 1/4-inch thread stated
Own weight
Not published in this listing
Amazon reference
B0CBR7B6TG (same reference on 6 Amazon marketplaces)
EAN
5060987641349

The measurement that decides it

40.64 × 27.94 cm. The tray. The maker states it and explicitly invites comparing a projector’s footprint against it, which is the right instruction — a projector overhanging its tray is unstable regardless of the load rating.

The height range

66 to 131 cm. Low enough for a coffee-table geometry and high enough for a table-height throw. The lens has to end up just below or just above the bottom edge of the image, depending on the projector’s own vertical offset — which is why a range this wide is useful.

What a tray cannot do

Hold the projector. It sits by gravity and friction, and a tray tilted towards a screen holds by less. A 1/4-inch photographic thread screwed into the projector’s own socket holds positively, and that is the mounting interface to prefer when the projector has the socket.

The figure that is missing

The stand’s own weight. A light tripod with a two-kilogram projector at a metre and a half is a trip hazard with an expensive object on top. Stability is a function of mass and leg spread, not of load rating, and neither is published.

Where it belongs

A projector that moves — between rooms, into a garden, to a friend’s house. That is the case a ceiling mount cannot answer, and it is what this stand is for.

Availability

On sale from 30 € to 32 € on the German, British, French, Italian and Spanish Amazon stores at the time of checking.

Listed but with no offer on the American Amazon store — the reference exists there and nobody is currently selling it.

Prices and availability are what Keepa reported on the date this page was updated; both move.

Prices quoted in this text were read on 4 September 2026. The live price is at the top of the page.

Machines this fits

All projector stands and tripods