PWAYTEK HT202P HDMI extender over Cat 5e/6/7, 50 m
Fifty metres over one network cable, uncompressed, with only one power supply needed — and a stated distance switch that has to be set correctly.
- Method
- Transmitter and receiver pair over a single network cable — stated
- Cable category required
- Cat 5e, Cat 6 or Cat 7 — stated
- Stated distance
- Up to 50 m — stated
- Stated resolution
- 1080p at 60 Hz, with 3D — stated
- Compression
- Uncompressed — stated
- Power
- PoC — one power supply feeds both units through the network cable — stated
- EDID
- Copy function that reads and matches the display parameters — stated
- Standard
- HDMI 1.3 compliant — stated
- Setup requirement
- A distance switch must be set to "30M" for runs of 0–25 m — stated by the maker
- Amazon reference
- B09785ZC5S (same reference on 5 Amazon marketplaces)
- EAN
- 0770773531895
- Only one power supply needed for both ends, which removes a socket at the far end
- An EDID copy function stated explicitly, which is the usual cause of a black screen on this shelf
- 1080p only — it will not carry 4K at any distance
Best for: A 1080p projector fifty metres from the rack, in a room where the network cable is already installed.