Adjustment you can reach, and a drop that fits the room · review
A telescopic drop of 380 to 580 mm with four sets of projector screws in the box — the mount for a ceiling that needs the lens lower.
The bottom line The mount for a high ceiling, with the most complete screw kit here and a minimum hole spacing that excludes small machines.
A drop of 380 to 580 mm, adjustable. Where the lens ends up relative to the screen governs the geometry of the picture. A projector’s own lens shift absorbs some of the difference; in a room with a high ceiling it cannot absorb 50 cm, and a fixed-drop mount leaves the image wrong in a way no menu setting fixes cleanly.
4× M3×8, 4× M4×10, 4× M5×10, 4× M6×10, listed individually. Projector mounting threads vary between makers, and a mount that supplies one size is a mount that sends you shopping. This one covers the range.
210 mm minimum hole spacing. Compact projectors with closely spaced holes fall below the range, and the mount will not reach in. Measure the spacing underneath the machine before ordering — this is the specification that decides whether it fits, not the weight.
360° rotation and ±15° tilt. Two mechanical axes. The third has to be corrected in the projector menu, digitally, which resamples the image and costs sharpness.
A stated 13.5 kg describes the bracket. What holds it up is the ceiling, and overhead is where the maker’s instructions matter most.
On sale from 25 € to 30 € on the German, British, French, Italian and Spanish Amazon stores at the time of checking.
Not found on the American Amazon store, where the buy link falls back to a local search rather than to a page that does not exist.
Prices and availability are what Keepa reported on the date this page was updated; both move.
Prices quoted in this text were read on 4 September 2026. The live price is at the top of the page.
| Drop length | 380–580 mm, adjustable — stated |
|---|---|
| Stated load capacity | 13.5 kg — the mount, not the ceiling |
| Rotation | 360° — stated |
| Tilt | ±15° — stated |
| Hole spacing supported | 210–330 mm — stated |
| Screws supplied | 4× M3×8, 4× M4×10, 4× M5×10, 4× M6×10 — stated individually |
| Cable management | Integrated — stated |
| Finish | White — stated |
| Amazon reference | B01LYMSPK2 (same reference on 5 Amazon marketplaces) |
| EAN | 4250580124047 |
Because the lens height relative to the screen decides the geometry of the picture, and a projector's own lens shift can only absorb so much. In a room with a high ceiling, a fixed 14 cm mount leaves the lens too high and a 380 to 580 mm one puts it where it belongs.
Because projector mounting threads vary between M3 and M6 between makers, and a mount that supplies only one size is a trip to a hardware shop with a projector in one hand. Listing all four means the box is complete.
15 kg stated load · 14 cm from the ceiling · universal arm span to 48.43 cm · 360° rotation · ±15° tilt on a ceiling, 60° down on a wall · integrated cable routing
A 15 kg universal mount with an arm span to 48.43 cm — enough capacity and enough reach for a real home cinema projector.
Best for: A home cinema projector on a ceiling where 14 cm of drop puts the lens at the right height.
≈ 16 €
35–53 cm telescopic arm · 7 kg stated load · 360° swivel · hole spacing 5.2"–14" (about 13–36 cm) · quick-release system · drilling template supplied
A quick-release head on a telescopic arm — the mount for a projector that comes down regularly, at the price of capacity.
Best for: A projector that is put away between uses, or a room where it has to come down for maintenance.
≈ $66 / £54 / 63 €
13.5 cm drop · 2 kg stated load · 360° rotation · 90° tilt · aluminium alloy · requires a 1/4" (6.35 mm) thread
A 2 kg mount for a mini projector with a camera thread — which is a specification to check before ordering, not after.
Best for: A portable projector with a tripod thread, hung close to a ceiling.
≈ £10 / 11 €
