Adjustment you can reach, and a drop that fits the room · review
A stated 20 kg — the highest capacity on this shelf — with a hardware kit that names four ceiling and wall constructions.
The bottom line The strongest mount here and the one that thought hardest about ceilings — with the narrowest swivel range.
20 kg stated. The highest on this shelf, and comfortably beyond any home projector. On a mount that will hold something over people’s heads for years, headroom is not wasted.
Wood studs, concrete surfaces, flat ceilings and suspended ceilings. That last one is the interesting inclusion: a suspended ceiling has no structural capacity of its own, and a mount that comes with hardware intended for one has at least considered the situation. It remains the maker’s instructions, not this page, that say how to use it.
±15° tilt, ±8° swivel, on a 33 to 54 cm telescopic pole. The tilt range is standard for the shelf; the swivel is narrow. Swivel corrects small alignment errors, and if a joist forces the mounting point off to one side, eight degrees may not be enough to bring the picture back square.
The supported hole spacing, as a measurement. “Universal” covers a range and the range is not published here — measure the pattern underneath your projector and confirm before ordering.
The instructions may not be supplied in your language. Stated by WALI itself, which is worth knowing on a component that goes overhead.
On sale from 31 € to 40 € on the German, American, British, French, Italian and Spanish Amazon stores at the time of checking.
Prices and availability are what Keepa reported on the date this page was updated; both move.
Prices quoted in this text were read on 4 September 2026. The live price is at the top of the page.
| Drop length | 33–54 cm extension pole, adjustable — stated |
|---|---|
| Stated load capacity | 20 kg — the mount, not the ceiling |
| Tilt | ±15° — stated |
| Swivel | ±8° — stated |
| Mounting options | Ceiling, wall and flush ceiling — stated |
| Fixings supplied | Hardware kit stated for wood studs, concrete surfaces, flat ceilings and suspended ceilings |
| Material | Steel — stated |
| Finish | Black — stated |
| Amazon reference | B0F3HZ1752 (same reference on 6 Amazon marketplaces) |
| EAN | 0811278027169 |
Because most mounts state a load and leave the fixing to the buyer. Naming wood studs, concrete, flat ceilings and suspended ceilings tells you the kit was assembled with those situations in mind — which is closer to useful than a capacity figure on its own.
If the mount is positioned squarely in front of the screen, yes — swivel corrects small alignment errors rather than large ones. If the fixing point is forced off to one side by a joist, eight degrees is not much room, and that is worth establishing before drilling.
15 kg stated load · 14 cm from the ceiling · universal arm span to 48.43 cm · 360° rotation · ±15° tilt on a ceiling, 60° down on a wall · integrated cable routing
A 15 kg universal mount with an arm span to 48.43 cm — enough capacity and enough reach for a real home cinema projector.
Best for: A home cinema projector on a ceiling where 14 cm of drop puts the lens at the right height.
≈ 16 €
380–580 mm adjustable drop · 13.5 kg stated load · 360° rotation · ±15° tilt · 210–330 mm hole spacing · four screw sets supplied (M3, M4, M5, M6) · integrated cable routing
A telescopic drop of 380 to 580 mm with four sets of projector screws in the box — the mount for a ceiling that needs the lens lower.
Best for: A high ceiling where the lens has to come down 40 to 60 cm to line up with the screen.
≈ £34 / 25 €
35–53 cm telescopic arm · 7 kg stated load · 360° swivel · hole spacing 5.2"–14" (about 13–36 cm) · quick-release system · drilling template supplied
A quick-release head on a telescopic arm — the mount for a projector that comes down regularly, at the price of capacity.
Best for: A projector that is put away between uses, or a room where it has to come down for maintenance.
≈ $66 / £54 / 63 €
