Flat to the wall, and nothing to work loose · review
BONTEC 118MB low-profile TV wall mount, 37–85" review
A low-profile wall mount for 37 to 85-inch TVs that holds the screen 1.5 inches from the wall, tilts from +1° to −8° and takes VESA patterns up to 600×400. BONTEC states 132 lb; the wall behind it decides the rest.
A simple low-profile mount with a wide VESA and screen-size range for its price, and just enough tilt to move a window reflection off the screen. Key figures: 37–85" · VESA 200×100 to 600×400 · 132 lb stated load · 1.5 in wall gap · +1° to −8° tilt · auto-locking bars · bubble level and hardware supplied. Amazon.com had a product page for it but no seller on October 25, 2026. Our score: 7.8/10, specification-checked.
What it is
A fixed, low-profile TV wall mount with a small tilt. The Amazon.com listing gives 37 to 85-inch flat and curved screens, VESA patterns from 200×100 to 600×400 mm, a stated load of 132 lb, and a gap of 1.5 inches between the screen and the wall. It was selling for $21.99 from a third-party seller on November 7, 2026.
The VESA range
Up to 600×400 mm. Many budget fixed mounts stop at 400×400, while larger TVs increasingly use wider hole patterns. Combined with 85 inches and 132 lb, that range covers most large sets. Check the pattern in your TV’s manual before ordering: it is the number that decides whether the bracket fits at all.
The tilt
+1° to −8°. Nine degrees in total moves a window reflection off the picture. It does not correct a set mounted high on a wall; if the TV will sit above eye level, a tilting mount with a wider range is the better choice.
The wall gap
1.5 inches. Close enough to look flush from across the room, with a little space behind the set for the power cord and an HDMI cable. Ultra-slim fixed brackets sit closer, but leave almost no room for plugs.
Installation
The listing names wood stud, brick and concrete walls and includes the hardware and a bubble level. The TV bracket hooks onto the wall plate and locks automatically as it is lowered, so the set does not need to be held up while a screw is tightened behind it.
The figure that is not about your wall
132 lb is what BONTEC states for the bracket. On a stud wall, the lag bolts must go into the studs; on drywall alone, no bracket figure applies.
Prices quoted in this text were read on November 7, 2026. The live price is at the top of the page.
Buying it in the United States
Amazon.com has a product page for it (ASIN B0073UBRP2), but no seller was offering it there on October 25, 2026. The button opens that page so you can see whether stock has returned; if it has not, the models below are sold in the United States.
In its favor, and against it
Strengths
VESA up to 600×400, which covers large sets that a 400×400 mount will not take
Nine degrees of tilt, enough to move a window reflection off the picture
37 to 85 inches and 132 lb stated, at about $22
Compromises
At 1.5 in from the wall it sits further out than an ultra-slim fixed bracket
Nine degrees of tilt does not replace a proper tilting mount for a set mounted high
The 132 lb is a bracket figure; on drywall the anchors and studs decide
Specifications
Screen size
37 to 85 inches, flat and curved — stated
VESA range
200×100 to 600×400 mm — stated
Stated load capacity
132 lb — the bracket, not the wall
Wall gap
1.5 in — stated
Tilt
+1° up to −8° down — stated
Locking
Auto-locking bars that click onto the wall plate — stated
For glare, yes: a small downward angle moves a window reflection off the picture. For a set mounted well above eye level it is not enough, and a tilting mount with a wider range is the better choice.
Will it fit my TV?
Check three numbers on the back of your TV or in its manual: the VESA pattern, which must be between 200×100 and 600×400 mm; the weight, which must be under 132 lb; and the screen size, 37 to 85 inches per the Amazon.com listing.
What wall can it go on?
The listing names wood studs, brick and concrete. On a stud wall, the lag bolts must go into the studs, not just the drywall between them.
What is the auto-locking system?
Two bars on the TV bracket click into the wall plate as the set is lowered on, instead of needing a screw tightened behind the screen. It makes installation easier for two people and makes removal a deliberate action.
Our score
7.8/ 10
A simple low-profile mount with a wide VESA and screen-size range for its price, and just enough tilt to move a window reflection off the screen.
Against the fixed and low-profile TV mounts in the same bracket
Between fixed and low-profile TV mounts at a nearby price. Shown: what they all state. A half-filled column says nothing.
What these fixed and low-profile TV mounts do not share
If price decides: this model, at $22.
Highest Stated load capacity in the table: Hama Rigid flat TV wall mount, up to 90" (220 lb (100 kg) — the mount, not the wall).
Highest Wall gap in the table: this model (1.5 in — stated).
This model holds the table’s highest figure for Wall gap.
Who should pick this one, among fixed and low-profile TV mounts
A large TV on a stud, brick or concrete wall, where a few degrees of downward tilt is all the movement you need.
What buyers actually choose
Amazon reports what buyers took in the month before this page was last checked: at least 100.
The figure is a floor, rounded by Amazon, and read through Keepa — it says what buyers picked, not what a maker claims.
Sources
Specifications: the manufacturer sheet and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
37–90" · VESA 50×50 to 800×400 · 220 lb (100 kg) stated load · 1 in (2.6 cm) wall gap · steel · spirit level supplied
A rigid, ultra-flat steel wall mount for 37- to 90-inch TVs, rated for 220 lb (100 kg) and VESA patterns up to 800×400, sitting about an inch from the wall. Those are the widest limits of the two fixed mounts on this site. On Amazon.com it is only offered by third-party sellers, at about $224.
Best for: A very large, heavy set on a solid wall, where the VESA pattern is wider than 600 mm and no tilt is wanted.
4K PRO-UHD · 3,000 lumens white AND color brightness · 40,000:1 stated contrast · 3LCD · optional Wi-Fi
A 3LCD projector that publishes white and color brightness as the same figure — a distinction single-chip machines rarely make, and one that decides how a saturated image actually looks.
Best for: A viewer who notices color rather than pixel count, and anyone bothered by the rainbow effect single-chip projectors can produce.
