The flattest and the most honest about what it will not fit — and the smallest in what it will carry. Key figures: 32–55" · VESA 50×50, 75×75, 100×100, 200×100, 200×200 — 100×200 explicitly NOT supported · 66.1 lb (30 kg) stated load · 0.55 in (14 mm) wall gap · supplied pre-assembled. Amazon.com had a product page for it but no seller on October 25, 2026. Our score: 7.6/10, specification-checked.
The disclosure that makes this listing useful
100×200 mm is not supported. VESA patterns are written width × height, and 200×100 is a different pattern from 100×200 even though the numbers match. Almost every listing states what it fits and stays silent on what it does not; this one names the exception, and it is the exception that sends mounts back.
The gap
14 mm. The flattest figure in this group, and the hardest to plug a cable into. Everything that will ever be connected has to be connected first.
The limits
30 kg and 55 inches. Both are the lowest among the fixed mounts here, and both are perfectly adequate for the size range the mount is sold for. They are simply not the mount for a large set.
The fixings
Wall plugs for concrete walls only, stated plainly. Any other wall — drywall, hollow block, aerated concrete — needs fixings chosen for it. The stated 66.1 lb (30 kg) describes the bracket; it says nothing about the wall.
What arrives in the box
A pre-assembled bracket, screen screws, wall screws and plugs. That is a genuinely short installation.
Buying it in the United States
Amazon.com has a product page for it (ASIN B00E7TNAMU), but no seller was offering it there on October 25, 2026. The button opens that page so you can see whether stock has returned; if it has not, the models below are sold in the United States.
In its favor, and against it
Strengths
A 0.55 in (14 mm) wall gap, the flattest figure on this shelf
States a VESA pattern it does not support, which almost no listing does
Supplied pre-assembled, so installation is drilling and hanging
Compromises
66.1 lb (30 kg) and 55 inches are the lowest limits among the fixed mounts here
The supplied plugs are for concrete walls only — any other wall needs its own fixings
A 0.55 in (14 mm) gap makes cable access harder than any other mount in this group
100×3.94 × 7.87 in (200 mm) — stated explicitly by the maker
Stated load capacity
66.1 lb (30 kg) — the mount, not the wall
Wall gap
0.55 in (14 mm) — stated
Assembly
Supplied pre-assembled — stated
Fixings supplied
Wall plugs for concrete walls only, screen screws and wall screws — stated
Amazon reference
B00E7TNAMU
EAN
4260201861602
What gets asked most
Why does 100×200 not being supported matter?
Because 200×100 and 100×200 are the same two numbers in a different orientation, and they are different patterns on the back of a television. A mount that fits one may not fit the other, and this maker is unusual in saying so rather than leaving the buyer to find out.
The plugs are for concrete — what about drywall?
They will not do. Hollow partitions need fixings designed for them, and the right choice depends on the board thickness and whether there is a stud behind. That is a question for the maker's instructions and the wall, not for a specification sheet.
Our score
7.6/ 10
The flattest and the most honest about what it will not fit — and the smallest in what it will carry.
Against the fixed and low-profile TV mounts in the same bracket
Between fixed and low-profile TV mounts at a nearby price. Shown: what they all state. A half-filled column says nothing.
Model
Price
Screen size
Stated load capacity
Wall gap
RICOO F0222 ultra-slim fixed TV wall mount, 32–55"
What these fixed and low-profile TV mounts do not share
If price decides: BONTEC 118MB low-profile TV wall mount, 37–85", at $22.
Highest Stated load capacity in the table: Hama Rigid flat TV wall mount, up to 90" (220 lb (100 kg) — the mount, not the wall).
Highest Wall gap in the table: BONTEC 118MB low-profile TV wall mount, 37–85" (1.5 in — stated).
Who should pick this one, among fixed and low-profile TV mounts
A mid-sized set on a solid wall, where sitting genuinely flat matters more than size headroom.
Sources
Specifications: the manufacturer sheet and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
37–85" · VESA 200×100 to 600×400 · 132 lb stated load · 1.5 in wall gap · +1° to −8° tilt · auto-locking bars · bubble level and hardware supplied
A low-profile wall mount for 37 to 85-inch TVs that holds the screen 1.5 inches from the wall, tilts from +1° to −8° and takes VESA patterns up to 600×400. BONTEC states 132 lb; the wall behind it decides the rest.
Best for: A large TV on a stud, brick or concrete wall, where a few degrees of downward tilt is all the movement you need.
37–90" · VESA 50×50 to 800×400 · 220 lb (100 kg) stated load · 1 in (2.6 cm) wall gap · steel · spirit level supplied
A rigid, ultra-flat steel wall mount for 37- to 90-inch TVs, rated for 220 lb (100 kg) and VESA patterns up to 800×400, sitting about an inch from the wall. Those are the widest limits of the two fixed mounts on this site. On Amazon.com it is only offered by third-party sellers, at about $224.
Best for: A very large, heavy set on a solid wall, where the VESA pattern is wider than 600 mm and no tilt is wanted.
4K PRO-UHD · 3,000 lumens white AND color brightness · 40,000:1 stated contrast · 3LCD · optional Wi-Fi
A 3LCD projector that publishes white and color brightness as the same figure — a distinction single-chip machines rarely make, and one that decides how a saturated image actually looks.
Best for: A viewer who notices color rather than pixel count, and anyone bothered by the rainbow effect single-chip projectors can produce.
