Flat to the wall, and nothing to work loose · review
Hama Rigid flat TV wall mount, up to 90" review
A rigid, ultra-flat steel wall mount for 37- to 90-inch TVs, rated for 220 lb (100 kg) and VESA patterns up to 800×400, sitting about an inch from the wall. Those are the widest limits of the two fixed mounts on this site. On Amazon.com it is only offered by third-party sellers, at about $224.
The widest VESA range and highest stated load of the fixed mounts here, at the point where the wall, not the bracket, decides. At the third-party US price, only worth it if your TV's pattern is wider than 600×400. Key figures: 37–90" · VESA 50×50 to 800×400 · 220 lb (100 kg) stated load · 1 in (2.6 cm) wall gap · steel · spirit level supplied. Amazon.com had a product page for it but no seller on October 25, 2026. Our score: 7.8/10, specification-checked.
The numbers
37 to 90 inches. VESA 50×50 to 800×400. 220 lb (100 kg). About 1 inch from the wall. The VESA figure matters most. Large TVs use wide hole patterns, and a mount that stops at 600 mm cannot reach them whatever its load rating. The other fixed mount on this site, the Bontec, stops at 600×400 and 85 inches; the Hama goes to 800×400 and 90.
What is deliberately absent
Movement. This is a rigid mount: no tilt, no swivel, nothing to work loose. The TV hangs flat, roughly 2.6 cm off the wall, like a picture. If the set goes above eye level, a tilting mount such as Hama’s own tilting model on this site is the better choice.
The wall becomes the question
At a stated 220 lb the bracket is no longer the constraint. What is behind the drywall is. Find the studs or identify the masonry, use fixings rated for that wall, and plan a 90-inch set as a two-person job.
The US listing says less
The European listings of this same reference state a ten-year guarantee and original fischer plugs. The Amazon.com listing names neither; it lists mounting material, a spirit level and instructions, with English not guaranteed. Treat both as unconfirmed for a US purchase.
The price
On Amazon.com the mount is only offered by third-party sellers, at about $224 on November 8, 2026, against about €33 to €44 in Germany, France, Spain and Italy. That is hard to justify unless your TV really needs 800×400. For a set up to 85 inches with a 600×400 pattern, the Bontec fixed mount here, at about $22, does the job.
Prices are what Keepa reported that day; they move.
Prices quoted in this text were read on November 8, 2026. The live price is at the top of the page.
Buying it in the United States
Amazon.com has a product page for it (ASIN B08LL779NP), but no seller was offering it there on October 25, 2026. The button opens that page so you can see whether stock has returned; if it has not, the models below are sold in the United States.
In its favor, and against it
Strengths
VESA to 800×400, wider than the 600×400 limit of the other fixed mount on this site
A stated 220 lb (100 kg) and 90 inches
Sits about an inch from the wall
Compromises
Only third-party sellers on Amazon.com, at about $224, several times the European price
No tilt at all: this is a rigid mount
The US listing names neither the fischer plugs nor the ten-year guarantee of the European listings
Not stated on the Amazon.com listing; the European listings state 10 years
Manufacturer reference
00118128
Amazon reference
B08LL779NP
EAN
4047443448484
What gets asked most
Why does 800×400 matter?
Because TVs above about 75 inches often use hole patterns wider than 600 mm, and a mount that stops at 600×400 cannot reach them. On this site the Bontec fixed mount stops at 600×400; the Hama goes to 800×400. It is the specification that most often rules a mount out for a large set.
Does a stated 220 lb mean my wall will hold it?
No. The maker rated the bracket. A hundred kilograms on a hollow partition is a different problem from a hundred kilograms on solid brick or concrete, and only the wall and the maker's instructions for that wall can answer it.
Is it worth $224?
Only if you need its range. On Amazon.com it is sold by third-party sellers at about $224, while the same listing sells for about €33 to €44 in Europe. If your TV is 85 inches or less with a pattern up to 600×400, the Bontec fixed mount on this site, at about $22, covers it and adds a small tilt.
Does it come with a ten-year guarantee?
The European listings of the same reference state a ten-year guarantee and original fischer plugs. The Amazon.com listing mentions neither, only mounting material and a spirit level, so check with the seller before relying on them.
Our score
7.8/ 10
The widest VESA range and highest stated load of the fixed mounts here, at the point where the wall, not the bracket, decides. At the third-party US price, only worth it if your TV's pattern is wider than 600×400.
Against the fixed and low-profile TV mounts in the same bracket
Between fixed and low-profile TV mounts at a nearby price. Shown: what they all state. A half-filled column says nothing.
What these fixed and low-profile TV mounts do not share
If price decides: BONTEC 118MB low-profile TV wall mount, 37–85", at $22.
Highest Stated load capacity in the table: this model (220 lb (100 kg) — the mount, not the wall).
Highest Wall gap in the table: BONTEC 118MB low-profile TV wall mount, 37–85" (1.5 in — stated).
This model holds the table’s highest figure for Stated load capacity.
Who should pick this one, among fixed and low-profile TV mounts
A very large, heavy set on a solid wall, where the VESA pattern is wider than 600 mm and no tilt is wanted.
Sources
Specifications: the manufacturer sheet and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
37–85" · VESA 200×100 to 600×400 · 132 lb stated load · 1.5 in wall gap · +1° to −8° tilt · auto-locking bars · bubble level and hardware supplied
A low-profile wall mount for 37 to 85-inch TVs that holds the screen 1.5 inches from the wall, tilts from +1° to −8° and takes VESA patterns up to 600×400. BONTEC states 132 lb; the wall behind it decides the rest.
Best for: A large TV on a stud, brick or concrete wall, where a few degrees of downward tilt is all the movement you need.
4K PRO-UHD · 3,000 lumens white AND color brightness · 40,000:1 stated contrast · 3LCD · optional Wi-Fi
A 3LCD projector that publishes white and color brightness as the same figure — a distinction single-chip machines rarely make, and one that decides how a saturated image actually looks.
Best for: A viewer who notices color rather than pixel count, and anyone bothered by the rainbow effect single-chip projectors can produce.
