Skip to content

Perlegear

Mounts sized by screen diagonal, weight and reach

In brief

A TV mount brand whose listings state screen range, load, VESA pattern and arm reach. Reviewed here: the PGMF24B long arm, a European model. Reviewed here: Perlegear PGMF24B full-motion TV wall mount. None had an Amazon.com offer on October 25, 2026.

What they actually make

Television wall mounts, fixed, tilting and full-motion, described by the screen sizes they accept, the weight they are rated for and the VESA patterns they bolt to. The maker named on the listings is BESTQI Innovation (Hong Kong) Technology; in Europe the mounts are sold by BSQ Technology EU.

The one reviewed here

The Perlegear PGMF24B is a single-arm full-motion mount for 32- to 65-inch screens: 132.3 lb (60 kg) stated, VESA 200×100 to 400×400, an arm that extends from 74 to 700 mm, −15° to +5° of tilt through two knobs, ±90° of swivel and ±3° of levelling. It publishes its extension, the figure many arm listings leave out. It is a European reference: Keepa shows no Amazon.com listing for it on November 4, 2026.

What Perlegear sells in the United States

On Amazon.com, Keepa lists other Perlegear full-motion mounts on November 4, 2026, among them the PGMF21 for 26- to 74-inch sets up to 99 lb, the UL-listed PGLF8 for 42 to 90 inches up to 132 lb, and the PGLF16 for 45 to 95 inches up to 150 lb. They are not reviewed on this site; read their own listings for reach and VESA before ordering.

What to check before ordering

  • The VESA pattern on the back of your set against the mount’s range. The PGMF24B starts at 200×100, so a 100×100 screen will not bolt on.
  • The wall. A rating is the mount’s, not the wall’s. On an arm, the load at the fixings grows with the reach: the same screen asks far more of the bolts at 700 mm than folded flat.
  • The fixings. Listings name concrete, brick and wood studs. A drywall partition needs the plate in the studs, not in the board.

Every Perlegear product we have reviewed

What each Perlegear review concluded